Important Safety Instructions - Schumacher INC-2405A Owner's Manual

Industrial series battery charger for 24-volt batteries
Table of Contents

Advertisement

Available languages

Available languages

IMPORTANT: READ AND SAVE THIS SAFETy AND INSTRUCTION MANUAL.
1.

IMPORTANT SAFETy INSTRUCTIONS

WARNING: This battery charger is to be used for charging 24 volt bat-
teries only. Use of this charger on other batteries could lead to severe
property damage or personal injury.
1.1
SAVE THESE INSTRUCTIONS – The INC-2405A offers a wide range of
features to accommodate your needs. This manual will show you how to
use your charger safely and effectively. Please read, understand and fol-
low these instructions and precautions carefully, as this manual contains
important safety and operating instructions.
1.2
WARNING: Pursuant to California Proposition 65, this product contains
chemicals known to the State of California to cause cancer and birth de-
fects or other reproductive harm.
1.3
Do not expose the charger to rain or snow.
1.4
Use only recommended attachments. Use of an attachment not recom-
mended or sold by Schumacher® Electric Corporation may result in a risk
of fire, electric shock or injury to persons or damage to property.
1.5
To reduce the risk of damage to the electric plug or cord, pull by the plug
rather than the cord when disconnecting the charger.
1.6
An extension cord should not be used unless absolutely necessary. Use of
an improper extension cord could result in a risk of fire and electric shock.
If an extension cord must be used, make sure:
That the pins on the plug of the extension cord are the same number,
size and shape as those of the plug on the charger.
That the extension cord is properly wired and in good electrical
condition.
That the wire size is large enough for the AC ampere rating of the char-
ger as specified in the table in Section 8.2.
1.7
Do not operate the charger with a damaged cord or plug; take it to a quali-
fied service person. (Call customer service at: 1-800-621-5485.)
1.8
Do not operate the charger if it has received a sharp blow, been dropped
or otherwise damaged in any way; take it to a qualified service person.
(Call customer service at: 1-800-621-5485.)
1.9
Do not disassemble the charger; take it to a qualified service person when
service or repair is required. Incorrect reassembly may result in a risk of
fire or electric shock. (Call customer service at: 1-800-621-5485.)
1.10
To reduce the risk of electric shock, unplug the charger from the outlet
before attempting any maintenance or cleaning. Simply turning off the
controls will not reduce this risk.
1

Advertisement

Table of Contents
loading

Table of Contents