Key Sequence - One for All 4 User Manual & Code Book

Key Sequence

You can program your ONE FOR ALL 4 to issue a sequence of
commands at the press of a button. For example, you may
want to turn on your Satellite and TV at the same time then
set your TV to programme 5. Any sequence of commands you
regularly use can be reduced to one key stroke for your
convenience. You can install a sequence on any key, except
for the device keys (TV, VCR, SAT and CD), the Magic key
and the Scan key.
To set up the sequence mentioned above on the Blue Fastext
key of your ONE FOR ALL 4:
Press and hold down the MAGIC
1
key until the red light blinks once
and then twice.
Press 995.
2
Then press the Blue Fastext key.
3
(This is the key to which the
sequence will be assigned.)
Next press SAT, POWER, TV,
4 SAT
POWER, 05 (Enter the
programme number exactly as you
TV
would on your original remote.).
To end the sequence, press and
5
hold MAGIC until the ONE FOR
ALL 4's red light blinks once and
then twice.
6
Whenever you press the Blue
Fastext key, the ONE FOR
ALL 4 will turn on your Satellite,
turn on your TV then set your TV
to programme 5.
To install any sequence, press:
MAGIC* + 995 + Key to which sequence will be assigned +
Sequence of commands + MAGIC*
*Here you must hold down MAGIC until the red light blinks
once and then twice.
17
All manuals and user guides at all-guides.com