One for All 4 User Manual & Code Book page 19

Shifted Sequences
You can also program your ONE FOR ALL 4 to issue a
sequence of commands by pressing the Magic key followed by
another key. This allows you to maintain the original function
of this key in every mode. A shifted Sequence can be set up
on the following keys: Power, 10, 20, Mute and the
VCR/Fastext keys.
Using the example from the previous page, you can
programme the ONE FOR ALL 4 to turn on your Satellite
and TV at the same time, then set your TV to programme 5
whenever you press Magic then the Blue Fastext key. This
allows you to keep the Blue Fastext function.
To set up this shifted sequence:
Press and hold down the MAGIC
1
key until the red light blinks once
and then twice.
Press 995.
2
Press and release MAGIC then
3
press the Blue Fastext key. (This is
the key to which the sequence will
be assigned.)
Next press SAT, POWER, TV,
4
SAT
POWER, 05. (Enter the
programme number exactly as you
would on your original remote.)
TV
To end the sequence, press and
5
hold MAGIC until the ONE FOR
ALL 4's red light blinks once and
then twice.
6
Whenever you press MAGIC then
the Blue Fastext key, the ONE
FOR ALL 4 will turn on your
Satellite, turn on your TV then set
your TV to programme 5.
18
All manuals and user guides at all-guides.com