The Magic key is used to set-up your ONE FOR ALL 1 Remote Control and to access special functions. LED: During the use of your ONE FOR ALL 1, the LED will light up red. Power Key: The Power key controls the same function as it did on your original remote.
Page 5
Fastext functions of your television. If on your original remote control these keys are used for Menu naviga- tion, the ONE FOR ALL Fastext keys may operate in the same way. - For a more detailed explanation of the Teletext and Fastext functions, please refer to the manual of your television.
Setting up the ONE FOR ALL 1 (How to set-up the ONE FOR ALL 1 to control your television) Direct code set-up To set up the ONE FOR ALL 1 for your television: Make sure your device (television) you wish to operate is switched on (not in standby).
Setting up the ONE FOR ALL 1 --> If your device does not respond to the ONE FOR ALL 1 after you have tried all the codes listed for your brand. --> If your brand is not listed at all.
(To find out which code is currently programmed) Once you have Set-Up your ONE FOR ALL 1, you can blink back your Set-up Code for future reference. To blink out your television code: Quick Code Reference Make sure you write down the code for your television in the boxes below and in the battery compartment for future easy reference.
Problem: Your brand is not listed in the code section? The ONE FOR ALL 1 does not operate your device(s)? The ONE FOR ALL 1 is not performing commands properly? Problems changing channels? The ONE FOR ALL 1 does not respond after...