Key Charts; Device Table - One for All URC-4220 Manual Booklet

WALRB4P manual booklet

Key Charts

When the LED (red light) blinks, the remote control is
working and (after programming) is sending signals.
Press VCR/PVR, DVD, CBL/SAT, or TV once to select a
desired home entertainment device to control.
Also see the Device Table on page 6.
Press POWER once to turn on or off the selected device.
For master power control, see Programming
A Master Power Macro on page 10.
Use the keypad (1 ~ 9 and 0) to directly select channels
(e.g., 009 or 031).
Use TV/VID to switch the TV's input to view TV or video
programs.
Press ENTER once after entering the channel numbers on
some TVs.
Use GUIDE to display your selected device's program
guide or setup menu.
Press MENU once to display your selected device's main
menu.
Use INFO to display the current channel and program or
on-screen directory.
Use EXIT to exit from your selected device's guide or
menu.
Use the Cursor Keys to move the cursor in the program
guide and menu screens.
Use SELECT (OK) to choose options from your selected
device's menu or guide.
Press LAST once to recall the last channel.
Use FAV to scan all channels, or after programming,
to scan up to 10 favorite channels.
Use CH + (or CH -) to select the next higher (or lower)
channel.
Press SUBTITLE/CC once to display (or turn off) subtitles or
closed captions,if available on your DVD player or
cable/satellite service.
For a PVR (or DVR), press PVR MENU once to display a
list of your recorded shows.
Press MUTE once to turn the sound off or on.
Use VOL + (or VOL -) to raise (or lower) the sound vol-
ume.
5/2/06 3:16 PM Page 5
5
Use REW, PLAY, FWD, PAUSE,or STOP to control your VCR,
PVR (or DVR), or DVD player.
For a DVD player, use SKIP F. or SKIP R. to view the next
or previous chapter.
For a VCR, PVR (or DVR), or VOD (if available), use SCAN-
or SCAN+ to quickly scan forward or back through a video
program. Use REPLAY for an instant replay. Use QUICK
SKIP to advance the video program a preset amount (as
set on your device).
Press REC twice to record a VCR or PVR (or DVR) program.
Use SLEEP to set the sleep timer on a selected device if
equipped with this feature.
SET
Use for all programming sequences.

Device Table

NOTE: Please refer to the table below when performing the instructions in "Programming
Device Control"on page 8.
After programming, the One For All 4 Device Universal Remote Control will
be able to control the following types of devices:
DEVICE KEY CONTROLS THESE TYPES OF DEVICES
• DVD Player
• TV/DVD Player Combo
• VCR/DVD Player Combo
• VCR
• TV/VCR Combo
• TV/VCR/DVD Player Combo
• VCR/DVD Player Combo
• PVR (or DVR)
• Cable Box (or Converter)
• Cable Box/PVR (or DVR) Combo
• Satellite Receiver
• Satellite Reciver/PVR (or DVR) Combo
• Television
6