Label Size - SATO M10e Operator's Manual

Section 7. Label Sheet Commands
COMMAND STRUCTURE
COMMAND FUNCTION
PRINTER INPUT
PRINTER OUTPUT
Special Notes
Page 7-2

Label Size

<ESC>PD,aaaa,bbbb,cc,dd
aaaa = Height of label in dots (480-3600)
bbbb = Label width in dots (480-1600
cc = Gap between labels in dots (00-99)
dd = Number of label rows printed before cut.
Example: <ESC>PD,600,1020,0,2
Placement: Following the <ESC>A1 Media Size command.
Default: aaaa = 480, bbbb=480, cc=0, dd=1
To specify the size of multiple up labels
<ESC>A
<ESC>A106363060
<ESC>PD,600,1020,0,2
<ESC>V100<ESC>H100<ESC>P2<ESC>L0202<ESC>XMABCD
<Q>2
<ESC>Z
The example specifies a label size of 600 dots printed on 1020 dot wide
media with not gap betweeh label columns and cut every two rows.
b
a
c
1. An error will occur when the Label Size specified differs from the A1
Media Size command; the format specification <ESC>_N command
and the <ESC>_D Variable Data command will be ignored.
2. The number of multiple-up labels in a row is automatically calcu-
lated from the width specified in the
"bbbb" label size specified.
PN 9001101 Rev. A
Cut position
d
(when d=2)
A1 command and the
<ESC>
SATO M10e