Sanyo XG-705A Owner's Manual page 86

10. How to Use the PJ Controller
Parameter
Language ..........................Select the desired language from the pull-down menu.
Auto Setup........................Automatically set PC adjustment and correct keystone distortion.
Keystone ..........................Press the ed buttons to correct keystone distortion.
Blue Back..........................Select "ON" or "OFF" to display/hide blue background when no signal is detected.
Display ..............................Select "ON", "OFF", or "Count Down Off" to display/hide the screen.
Logo Select ......................Select the image to show on the starting-up display from "User", "Default", or
Capture ............................Click "YES" to capture the projected image. The captured image can be used for
Ceiling ..............................By clicking "ON", the image gets reversed vertically and horizontally to adjust to
Rear ..................................By clicking "ON", the image gets reversed horizontally to adjust to rear projection.
Terminal ............................Select "Computer 2" or "Monitor Out" from the pull-down menu.
Input Search......................You can set automatic selection mode for Input Search.
Standby Mode ..................Click "Normal" or "Eco" to set the Standby Mode of the network.
No Show ..........................By clicking "ON", the image will be temporarily hidden from view.
Freeze ..............................By clicking "ON", the image will temporarily freeze.
Power Management ........Select "Ready", "Shut Down", or "OFF" from the pull-down menu. Enter the
On Start ............................By clicking "ON", the projector will be automatically turned on when the power
Lamp Control ....................Select the Lamp Mode from "Normal", "Eco", and "Auto".
Pointer ..............................Select the shape of the Pointer from "Spotlight-S", "Spotlight-M", "Spotlight-L",
Remote Control ................Select Remote Control Code from Code1 to Code 8. If you change the code here,
Key Lock ..........................To lock the projector, select "Projector Keys" (Locks the top panel operation)or
Fan ....................................Adjust the rotating speed of the cooling fans. "L1" is normal and "L2" is slower
Fan Control ......................You can choose running speed of the cooling fan.
Lamp Counter ..................You can reset the lamp counter.
Filter Counter ..................You can set the length of time to use the filter. You can also reset the Filter
Factory Default ................If you wish to reset all the values you set in the control menu, click "Yes".
P-TIMER ..........................When you click "P-TIMER", the timer will appear on the projected screen. Click
86
Description
Auto PC Adjust. ...Select "On" to automatically set the PC adjustment.
Auto Keystone ............Select Auto to automatically correct keystone
distortion, and select "Manual" to set keystone distortion
when the Auto set button is clicked.
Check the High Speed box if you wish to increase the variation. Click OFF if you do
not need this function.
"OFF".
the starting-up display. (Select User for Logo.)
ceiling-mount projection.
count-down time by clicking 7 8 buttons.
plug is connected to AC outlet.
"Pointer", "Finger", and "Laser".
you have to change the code of the remote control product at the same time.
"Remote Control" (Locks the remote control operation). If you do not need to lock,
select None.
and quieter mode.
Reset the lamp counter only when you change the lamp.
Counter. Reset only when you clean filter or replace filter.
again and the elapsed time will appear. Click again and the timer will disappear.