Sanyo XG-705A Owner's Manual page 43

Parameters and descriptions of Information
Parameter
Firmware Version ............................Show the firmware version of the projector.
Boot ROM Version ..........................Show the boot ROM version of the projector.
Hardware Address ..........................Show the MAC address.
IP Address ......................................Show the IP address currently set on the projector. If DHCP is set, the
Wireless Mode* ..............................Show the Communication standard 802.11b or 802.11b.g
Wireless Link Status*......................Show the Wireless communication mode and its status of the projector.
WEP Security* ................................Show the WEP (Encryption) setting status of the projector.
Current SSID* ................................Show SSID set on the projector.
Current Channel*......................Show the channel, through which the projector is currently
Data Transfer Rate* ........................Show the current Wireless communication speed of the projector. The
Current User/PC..............................Show the IP address of the computer, which is currently transferring
System Time ..................................Show the elapsed time since the power is turned on.
Projector ..........................................Show the name of projector. (Can be changed.)
Refresh button ................................Refresh the displayed data.
* Not shown at Wired LAN setting.
Description
IP address assigned from the DHCP server is displayed.
However, the WEP key is not shown.
communicating.
communication speed is automatically changed by the environment at
that time (11/5.5/2/1/54/48/36/24/18/12/9/6 Mbps). The communication
speed cannot be fixed.
images to the projector
The time can be reset by selecting "Reset" from the browser
configuration screen, or by disconnecting power from the projector and
connecting back on.
6. Configurations with Browser
43