Sanyo XG-705A Owner's Manual page 69

4. Specify the FTP server to provide image data
Host Name.... ..........Enter the IP address of the server.
Folder Path.... ..........Specify the directory where image data are stored. When the image
User ID ....................Enter the login ID access to the server.*
Password ................Enter the login password access to the server.*
5. Click APPLY button
Click APPLY button to set up the server information on the specified projector.
The configured server information can be stored even if you unplug the projector .
6. Select Play Mode and display the image
Play Mode ............Auto (Infinite Loop) (Keeps playing images repeatedly)
Auto Play Setting...Sec. (Sets time of playing back a image.)
Start.......................Start playing back images.
Stop ......................Stop playing back images.
Pause ....................Suspend playing back images in Auto Play mode.
Return ..................Return to the previous page manually in Manual mode.
Next ......................Go to next page manually in Manual mode.
REFRESH ..............Update and show the adjusted data.
RESTORE Factory Default Settings
........................Restore the factory default settings of Network Viewer.
data is in the root directory, just "/" is displayed. When the image data
is in a specified directory, put slashes"/" between directories such as
/test/data etc.
*If both the User ID and password are anonymous, enter
Auto (Plays or pauses all the images according to the Auto Play Setting mode)
Manual (Plays images manually)
Times (Select number of times of play back images.)
(All the values will return to the factory default settings.)
9. How to Use Network Viewer
" ".
anonymous
69