Analog Rf Antenna Connection - Sanyo DP32746 Owner's Manual

2

ANALOG RF ANTENNA CONNECTION

•
Connect a Cable signal (with or without a cable box) or RF antenna to the
Analog RF input.
The analog tuner in this DTV receives Analog Antenna signals, Analog Cable
signals, or the RF output from a VCR or cable box.
DTV Back
VCR Back
Analog Cable
CATV FRANCHISE NOTE: Cable companies, like public
utilities, are franchised by local government authorities. To
receive cable programs, even with equipment which is
capable of receiving cable channels, the consumer must
subscribe to the cable company's service.
I
DTV will select the correct Antenna mode for the type
of Analog RF signal connected automatically.
I
Use "Analog Antenna Signal" in the Setup menu to
change the Antenna Mode.
DTV Back
OR
VCR Back
Analog Satellite Receiver
NOTES: If you do not have a VCR, connect signal directly
Need help?
Visit our Web site at
OR
to the 75 ohm terminal (UHF/ VHF/CATV).
Don't be fooled by the phrase "Available in
High-Definition." The only resolution available
with any of these connections, regardless of the
original content, is standard analog (SDTV).
I
If you move the DTV to a new location, press the
RESET key twice after connecting the signal and
turning on the DTV.
www.sanyoctv.com
DTV Back
VCR Back
RF
Antenna
(Continued on page 8.)
1-800-877-5032
or Call
7