Installing Batteries In The Remote Control; Initial Signal Connections; Digital (Dtv) Rf Antenna Connection - Sanyo DP32746 Owner's Manual

GETTING STARTED (REQUIRED INITIAL SETUP)
INSTALLING BATTERIES IN THE
REMOTE CONTROL
Use 2 "AAA" batteries (Not supplied) .
Be sure batteries are installed correctly. Match
the "+" and "–" signs on the batteries with
marks inside the remote control.
NOTES:
– Do not mix old batteries with new
ones or mix different types of bat-
teries together.
– Remove the batteries if the
remote control will not be
used for a month or more.
Weak batteries may leak
and cause damage. (Normal
battery life is roughly six
months.)
– Use two " AAA "
Alkaline batteries.
IMPORTANT NOTE: Spent or discharged batteries must be
recycled or disposed properly in compliance with all applica-
ble laws. For detailed information, contact your local County
Solid Waste Authority.
Operational Tip for Monitor Use:
If the DTV is used as a monitor only, with a DVD
player or some other type of external equipment,
and no cable or antenna signal is available, the
following setup is necessary:
Your DTV is designed to automatically search for
available channels. Therefore, the initial start up
requires that you press the Channel (CH) L key,
enabling the DTV to automatically go through the
channel search process before you can operate
the DTV.
6
Need help?
Visit our Web site at
This LCD HDTV is capable of reproducing a
crystal clear digital picture and exceptional
sound. The signal makes the difference!

INITIAL SIGNAL CONNECTIONS

1
The digital tuner in this DTV receives HD signals
from an antenna. Digital signals from a Set-top
Box (STB) are received through the Component
In jacks.
This DTV can receive ANY resolution being
broadcast (HDTV, EDTV, or SDTV).
www.sanyoctv.com
or Call
DIGITAL (DTV) RF ANTENNA
CONNECTION
•
Connect an RF antenna to the Digital
Antenna In terminal.
DTV Back
After the initial channel search is completed, you
must press the Channel (CH) L key again to
complete the channel search process. This may
take several minutes.
After the channel search process is complete (2
searches), you can press the INPUT key on the
remote control to use the DTV as a monitor.
1-800-877-5032
RF Antenna