Sanyo DP26746 Quick And Easy Setup

HIGH-DEFINITION TELEVISION
Quik 'N Easy Setup
st
1
CONNECT
ANTENNAS
CONNECT DIGITAL ANTENNA
Don't be fooled by the phrase "Available in
High-Definition." To receive local Digital
channels in stunning High-Definition, you
must connect an antenna to the Digital
Antenna In (RF) terminal.
Other digital signals can be received from a
set-top box via the Component jacks (Quik
Step 3). The signal makes the difference.
Connect an antenna or analog cable system
to the UHF/VHF/CATV (RF) terminal to
receive analog channels.
DIGITAL
ANTENNA IN
Antenna
DIGITAL
HDMI
AUDIO
INPUT
Antenna
OUTPUT
or
UHF/VHF/CATV
Cable
Part Number: 1JC6P1P0226A-
r r d d
3 3
DVD PLAYER AND OTHER CRUCIAL
DIGITAL EQUIPMENT AUDIO VIDEO CONNECTIONS
BEFORE YOU MAKE ANY AV CONNECTIONS...
THE SIGNAL MAKES THE DIFFERENCE
Don't be fooled by the phrase "Available in High-Definition." To watch
Satellite or Digital Cable HD programs in High-Definition, you must:
1. Subscribe to Satellite or Digital Cable High-Definition service.
2. Connect your Satellite or Cable HD Receiver to the Component or
HDMI input jacks on the DTV.
Crucial Advice for Best Picture
Composite and RF output signals
from set-top boxes are Analog. These
jacks are for compatibility to older
analog equipment, such as, a VCR.
1. DO NOT connect your HD
Satellite receiver, HD Cable Box
receiver, or DVD player to the
Composite input jacks (VIDEO1)
on the DTV.
A/V OUT DIGITAL COMPONENT OUT
HDMI
AUDIO OUT (1080i/720p/480p)
(480i) OUTPUT
VIDEO Y
IN
S-VIDEO L P
B
OUT
AUDIO
OUT P
R
R
DIGITAL DIGITAL UHF/VHF/CATV
HDMI
AUDIO ANTENNA IN
INPUT
OUTPUT
DTV Back
DO NOT Connect an HD Receiver
to either RF Terminal
2
BEGIN CHANNEL SEARCH
Channel Search Note:
Before starting All Channel Search, point your anten-
na(s) toward the transmitting tower(s). (Log onto
www.antennaweb.org, then type in your street
address and zip code to view a list of your local chan-
nels and the type of antenna that is necessary to receive
them. Click on "View Street Level Map" to see a map
and graph of the transmitting towers in your area.)
The channel search process may take a few minutes.
Please be patient.
Monitor Usage Note:
If you did not connect an anten-
na in Quik Step 1, you must run
Channel Search twice. Follow
the on-screen instructions. See
Quik Step 3 below to connect a
DVD player or similar Audio
Video (AV) device.
DIGITAL UHF/VHF/CATV
ANTENNA IN After the second channel
search is complete, then you
can use the INPUT key to
select the Video 1, Video 2,
Video 3, or HDMI inputs.
COMPONENT VIDEO OUT
P R P B Y
OPT.
DIGITAL S-VIDEO OUT
HDMI OUT
R L
INPUT
AUDIO OUT VIDEO OUT
S-VIDEO
V
I
D
E
O
A
U
D
I
O
VIDEO1
DO NOT Connect Your HD Receiver
or DVD Player to the Composite Jacks
2. DO NOT connect the RF
output of a High-Definition
receiver (Satellite or Cable Box)
(1080i/7
to either DTV RF input terminal.
To view the highest resolution
your Digital AV set-top box or
DVD player can reproduce, you
must connect it to the VIDEO2,
VIDEO3, or HDMI inputs.
NOTE: Refer to the owner's manual for
HDMI connection instructions
nd
SEARCH FOR AVAILABLE
CHANNELS
INPUT
POWER
1 1 1 2 2
4 4 5 5
7 7 8 8
CAPTION
M
CH
PIX SHAPE AUDIO

DVD PLAYER CONNECTION

THE SIGNAL MAKES THE DIFFERENCE
The Component jacks on this DTV will accept HDTV, EDTV, or
SDTV video signals, making Component a great choice when con-
necting your DVD player.
Because there are two sets of component jacks, you have the option of
connecting a second digital device, such as, a Digital Cable Box or
Satellite Receiver.
NOTE: A subscription to Digital Cable service or Satellite service is required for
VIDEO OUT SELECT
S
those connections. The subscription must include High-Definition program-
COPONENT
ming and you must connect an HD Receiver to the component or HDMI jacks
to view HD images.
DTV Back
Y
Connecting a DVD Player
Pb
VIDEO
(VIDEO2 or VIDEO3)
Pr
(MONO)
L L L
R R R 1 Simply connect a Component
VIDEO2 VIDEO3
cable to a set of Green, Blue,
and Red video jacks on the
DTV and to a DVD player, as
shown. (Cable is not supplied.)
2 Then connect an Audio cable
to the matching set of Red and
White audio jacks and to the
DVD player, as shown. (Cable
is not supplied.)
3 Use the INPUT key on the
remote control to select Video 2
or Video 3. (See Monitor Usage
Note under Quik Step 2 above.)
.
AS
Call Us, We Can Help!
1-800-877-5032
www.sanyoctv.com
Press the POWER key.
1
First
Please connect all signals
and antennas to jacks and
the terminals on the back.
Then press Channel UP key.
Initial On-Screen Display
INPUT
Press the CH L (channel up) key to start
key
2
All Channel Search.
POWER
3 3 No input signal sources
key
could be located.
6 6
9 9
Please check cable or
EXIT
CHANNEL antenna connections.
UP key
Then press Channel UP key.
VOL
RESET
No Signal Detected—Press CHANNEL UP Again
(most common method)
DVD Player
Cable box, video
game, etc.)
OPT.
S-VIDEO OUT
DIGITAL
OUT
DTV Back
S-VIDEO
V
I
D
E
VIDEO
O
A
U
D
I
O
VIDEO1
NOTE: This DTV has two identical
sets of Component AV jacks (VIDEO2
& VIDEO3), use either set (or both
sets) when connecting digital AV
equipment.
(or Satellite receiver, Digital
Video (1)
COMPONENT VIDEO OUT
Y P B P R
VIDEO OUT SELECT
S
COPONENT
R L
AUDIO OUT VIDEO OUT
Audio (2)
Y
Pb
Pr
(MONO)
L L L
R R R
AUDIO
VIDEO2 VIDEO3
OUTPUT