Connecting Digital Audio Out Jack To A Multi-Channel Receiver - Sanyo DP32746 Owner's Manual

CONNECTING DIGITAL AUDIO OUT JACK TO A MULTI-CHANNEL
RECEIVER
®
Dolby Digital Audio provides 5.1 channels of
surround sound (five full-range channels [5] and
one low-frequency effect channel [.1]). A fiber
optics cable is used to carry the 5.1 surround
sound (for low-noise signal transfer).
1
Using a Fiber Optics cable, connect the
DTV's Digital Audio Output to the Digital
Audio Input of a Multi-Channel Receiver.
(Fiber optics cable is not supplied.)
2
Press POWER to turn on the DTV, then turn
on external equipment.
NOTES:When making the connection, do not pinch or
kink the fiber optics cable.
Red light visible at the Digital Audio Output
does not necessarily indicate that Dolby
Digital 5.1 audio is available. Digital audio is
made up of light pulses that the human eye
cannot detect. Dolby
available at the Digital Audio Output only
when received as part of a Digital signal.
IMPORTANT NOTE FOR MONITOR USE:
If you did not connect an antenna, you must
run All Channel Search twice before you can
select the AV inputs.
I
Position your DTV at least 2 feet from stereo
speakers. The magnets in the speakers may affect the
picture quality.
14
Need help?
Visit our Web site at
DIGITAL AV CONNECTIONS
®
Digital 5.1 audio is
www.sanyoctv.com
1
OPTICAL
DIGITAL CABLE
®
2
What you will need for connections:
Optical Cable – 1
1-800-877-5032
or Call
MULTI-CHANNEL
RECEIVER
REMOTE CONTROL
BACK
VIEW OF
DTV