Care And Cleaning - Sanyo DP32746 Owner's Manual

Problem Check these Conditions
G
No DTV Stereo or Check if station is broadcasting a true
SAP sound. MTS stereo signal or a SAP signal.
G
No UHF, VHF Cable Channel indicator C should not
Channels OK. appear next to the channel number.
G
Cannot select or Channel may be removed from
scan some memory.
G
channels.
Check antenna connections.
G
No digital signal being broadcast.
G
Signals are weak.
G
V-Guide is set to block programming.
G
No Cable channels Cable Channel Indicator C should
above number 13. appear next to channel number.
G
Remote Control Check batteries
G
will not work DTV. Make sure DTV is plugged in.
G
Cabinet makes This is a normal condition during
popping sound. warm-up and cool down of the plastic
cabinet parts.
CLEANING THE CABINET
The surface of the cabinet can be damaged if not
properly maintained. Many common household
aerosol sprays, cleaning agents, solvents, and
polishes will cause permanent damage to the
fine surface.
1. Unplug the power cord before cleaning the
television.
2. . Gently wipe the screen and cabinet with a
DRY SOFT CLOTH.

CARE AND CLEANING

This symbol on the nameplate means the product is Listed by Underwriters'
Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety
standards against risk of fire, casualty and electrical hazards.
Need help?
Visit our Web site at
Try these Solutions
G
Press AUDIO key.
G
Switch Analog antenna signal to
VHF/UHF.
G
Select Channel Scan Memory and manu-
ally add channels or start CH. (channel)
search.
G
Turn Antenna or install signal booster.
G
Set V-Guide to "None" or press the
RESET key to clear all settings and
restart channel search.
G
Switch Analog Antenna signal to Cable.
G
Replace batteries two "AAA."
G
Aim remote control at front of DTV.
The screen is likely to be damaged if it is not
maintained properly. DO NOT use hard objects
such as hard cloth or paper. DO NOT use
excessive pressure when cleaning the LCD
screen; excessive pressure can cause perma-
nent discoloration or dark spots.
NOTE: Never spray liquids on
the screen because they can
run down and enter the
cabinet. This may cause com-
ponent failure not covered
under Warranty.
www.sanyoctv.com
Page No.
18
22
23
25 ~ 26
19
22
6,17~19
1-800-877-5032
or Call
29