Digital Av Connections; Connecting External Equipment To Hdmi - Sanyo DP32746 Owner's Manual

This is the best option for picture and sound! Using the HDMI connection,
which has high-definition content protection, provides you with uncom-
pressed digital video and audio, Dolby
connection requires only one cable. As Real As It Gets!
CONNECTING EXTERNAL EQUIP-
MENT TO HDMI (INCLUDES HDCP
COPY PROTECTION)
To avoid problems with some brands of exter-
nal equipment, follow this procedure when
connecting cables and powering on your equip-
ment.
1
Switch off DTV and external equipment
before connecting cable. (Cable is not
supplied.)
2
Connect the external equipment's high
bandwidth HDMI Output to the DTV's
HDMI Input.
3
The DTV must be turned on first, press
POWER. Then turn on your external
equipment.
4
Press INPUT
HDMI to view a digital
program.
I
If the television HDMI pin configuration is different from
the pin configuration on your set-top box, you will need to
use an Adapter.
I
Press the INPUT key after connecting cables to access the
AV Inputs. There is NO need to tune to a blank channel.

DIGITAL AV CONNECTIONS

®
to select
Need help?
Digital 5.1 or PCM sound. This
SET-TOP BOX
DVD Player
HDMI CABLE
(Gently insert
cable into
DTV HDMI
Input jack.)
REMOTE CONTROL
4
3
What you will need for connections:
19 Pin HDMI Digital Cable – 1
(Make sure you check the pin configura-
tion of the cable plug-end*)
*Adapter may be required. Check with
your local electronics store.
IMPORTANT NOTE FOR MONITOR USE:
If you did not connect an antenna, you must
run All Channel Search twice before you can
select the AV inputs.
www.sanyoctv.com
Visit our Web site at
(Can be a Digital Satellite Receiver,
, or similar digital device.)
2
1-800-877-5032
or Call
BACK VIEW
OF DTV
11