Eco-Mode Schedule (Thin Provisioning Pool) - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 7 Thin Provisioning Pool Status
7.1 Thin Provisioning Pools
7.1.6

Eco-mode Schedule (Thin Provisioning Pool)

This function displays the Eco-mode setting state of the Thin Provisioning Pool.
• The ETERNUS AF250/AF650 and the ETERNUS DX200F do not support this function.
• When assigning Eco-mode schedule to the Thin Provisioning Pool, "Enable" the Thin Provisioning
function. Refer to "Set Thin Provisioning" in "ETERNUS Web GUI User's Guide (Settings)" for details.
• To check whether the Thin Provisioning function is enabled or disabled, refer to
Provisioning)" (page
• To use the Eco-mode, follow the procedure in "Modify Eco-mode General Setting" in "ETERNUS Web GUI
User's Guide (Settings)" and "Create Eco-mode Schedule" in "ETERNUS Web GUI User's Guide (Settings)" to
perform the general Eco-mode setup and create an Eco-mode schedule.
• To assign the Eco-mode schedule to a TPP, refer to "Assign Eco-mode Schedule (Thin Provisioning Pool)"
in "ETERNUS Web GUI User's Guide (Settings)".
The following items are displayed in the Main area:
• No.
The TPP number is displayed. Click this item to display the screen shown in
Detail (Basic)" (page
• Name
The TPP name is displayed. Click this item to display the screen shown in
Detail (Basic)" (page
355).
328).
328).
337
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
"7.3 Settings (Thin
"7.1.2 Thin Provisioning Pool
"7.1.2 Thin Provisioning Pool
P2X0-1260-19ENZ0