Nas Interface - Fujitsu ETERNUS DX60 S3 User Manual

Disk storage systems, all-flash arrays
Hide thumbs Also See for ETERNUS DX60 S3:
Table of Contents

Advertisement

Chapter 5 Connectivity Status
5.8 NAS
5.8.1

NAS Interface

This function displays a list of the NAS interfaces.
This function is displayed in a Unified Storage environment.
The following items are displayed in the Main area:
No.
The NAS interface number is displayed 0 - 159.
IP Address
The IPv4 address of the target port is displayed.
Subnet Mask
The subnet mask of the target port is displayed.
Gateway
The IPv4 gateway address of the target port is displayed.
IPv6 Link Local Address
The IPv6 link local address of the target port is displayed.
IPv6 Connect IP Address
The IPv6 connect IP address of the target port is displayed.
IPv6 Prefix length
Whether the Routing Information Protocol (RIP) setting is enabled or disabled is displayed.
When this setting is enabled, the network settings are simplified.
IPv6 Gateway
The IPv6 gateway address of the target port is displayed.
RIP Setting
Whether the Routing Information Protocol (RIP) setting is enabled or disabled is displayed.
VLAN ID
The VLAN ID of the target port is displayed.
If the VLAN ID is not specified, a "-" (hyphen) is displayed.
Port
The location information of the port with the NAS interface setting is displayed.
295
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
P2X0-1260-19ENZ0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents