Eco-Mode Schedule (Raid Group) - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 6 RAID Group Status

6.3 Eco-mode Schedule (RAID Group)

6.3 Eco-mode Schedule (RAID Group)
This function displays the set state of the Eco-mode that is applied for the RAID group.
The ETERNUS AF250/AF650 and the ETERNUS DX200F do not support this function.
• To use the Eco-mode, follow the procedure in "Modify Eco-mode General Setting" and "Create Eco-mode
Schedule" in "ETERNUS Web GUI User's Guide (Settings)" to perform the general Eco-mode setup and cre-
ate an Eco-mode schedule.
• To assign the Eco-mode to a RAID group, refer to "Assign Eco-mode Schedule (RAID Group)" in "ETERNUS
Web GUI User's Guide (Settings)".
The following items are displayed in the Main area:
• No.
The RAID group number is displayed. Click this item to display
• Name
The RAID group name is displayed. Click this item to display
• Status
The RAID group status is displayed. Refer to
RAID group status.
• Usage
The usage of the RAID group is displayed.
- Standard
A RAID group that is used for creating "Standard", "SDV", or "SDPV" type volumes
"A.3 RAID Group Status" (page 407)
313
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
"6.5 RAID Group Detail (Basic)" (page
"6.5 RAID Group Detail (Basic)" (page
for detailed information of
318).
318).
P2X0-1260-19ENZ0