Lun Group : Lu Qos Group Detail - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 5 Connectivity Status
5.7 Host-LU QoS
5.7.2

LUN Group : LU QoS Group Detail

The bandwidth limit for each LUN is displayed.
The following items are displayed in the Main area:
• LUN Group
The LUN group name is displayed. If the ETERNUS CLI command ("set mapping") is used for LUN mapping,
a "-" (hyphen) is displayed.
• LU QoS Group No.
The LU QoS group number is displayed between 0 and 1055. If a LU QoS group number is not configured, a
"-" (hyphen) is displayed.
• Host LUN
The host LUN number is displayed.
• Name
The volume name is displayed.
• Bandwidth Limit
The maximum performance is displayed in IOPS (throughput value). If the bandwidth limit has not been
configured (the bandwidth has not been limited), "Unlimited" is displayed.
280
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0