Fujitsu ETERNUS DX60 S3 User Manual page 402

Chapter 8 Advanced Copy Status
8.10 Copy Path Detail
●
Advanced Copy Path Status
• Local Port
The port information of the local storage system is displayed.
• Status
The port path status between the local and remote storage systems is displayed with an icon and a
character string.
- Normal
The copy path is in the normal state.
- Error
The copy path is in the error state.
• Remote Port WWN/iSCSI Name
The port WWN or iSCSI name of the remote storage system is displayed.
• IP Version
When the port type is iSCSI, the IP version for the destination iSCSI port of the copy path is displayed.
A "-" (hyphen) is displayed when the port type is FC.
- IPv4
- IPv6 (Link Local)
- IPv6 (Connect IP)
- "-" (hyphen)
• IP Address
When the port type is iSCSI, the IP address for the destination iSCSI port of the copy path is displayed.
The display format varies according to the IP version.
A "-" (hyphen) is displayed when the port type is FC.
- For IPv4 address
• xxx.xxx.xxx.xxx
xxx: 0 - 255 (decimal)
- For IPv6 address
• xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (hexadecimal, "a" - "f" are lowercase letters)
Refer to
• Bandwidth Limit
The bandwidth limit for sending data from the local storage system to the path is displayed.
- Unlimited
- 1 - 65535 Mbit/s
"IPv6 Address Notation" (page 253)
402
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
for details.
P2X0-1260-19ENZ0