KM 5773
3
Touch Current Measurement
Note:
On machines with a ground connection, touch current leakage
measurements should be carried out on all accessible conductive parts that
are not connected to ground.
Warning!
Touch current measurement should only be carried out after the ground
connection of the appliance under test has been checked and found to be
satisfactory! Dangerous voltages may exist on defective machines as well as
on accessible conductive parts that are not connected to ground!
Note:
Touch current measurement should be carried out on the following
accessible conductive parts:
None.
4
Risk of Injury due to Sharp Edges and Protruding Parts
Danger!
There may be a risk of injury due to protruding parts. Protective goggles should
be worn.
There may be a risk of injury due to sharp edges. Protective gloves should be
worn and the edge protection, mat. no. 05057680, should be used.
B
Modification History
When?
7/29/2016
Who?
Jessica Naples
7
Technical Information
What?
Compilation for Website