8.2.2 (a) Edit
IPCam Model: Shows the protocol of the camera.
IP Address: Network address of the connected camera.
Subnet Mask: The range of IP addresses that can be found in the network. This should always be set to the
default address 255.255.255.000.
MAC Address: The unique identifier assigned to the network interface of the camera for communications
at the data link layer.
Port: Allows access to your camera with your computer through your LAN or the Internet. The default value
is 80.
Version: Shows the firmware version of the camera.
Username: Shows the username of the credentials needed to establish a connection with the camera. By
default, admin.
Password: Shows the password of the credentials needed to establish a connection with the camera. By
default, password field should be empty.
57