Night Owl WNVR201 Series User Manual page 22

Select the appropriate video input channel on your TV or monitor to view the NVR.
4
Plug one end of the included Ethernet cable into the LAN port on the back of the Wireless NVR.
5
Plug the other end of the Ethernet cable into a port on the back of your router.
6
The Camera and NVR power adapters will be appropriately labeled. Ensure you are using the correct
7
power adapter when setting up your system.
Connect the Wireless NVR power adapter to the Power Input on the rear of the Wireless NVR.
8
Plug the Wireless NVR power adapter into a surge protector or Uninterruptible Power Supply (UPS).
9
(Surge protector and UPS not included)
You should see each camera appear on your TV/Monitor. You may now proceed to install your Wireless
NVR cameras in the desired location.
ETHERNET
ETHERNET
22
Router not included