Securing A Child Restraint In A Rear Seat Position - Saturn VUE 2008 Owner's Manual

JOBNAME: 1st Edition PAGE: 48 SESS: 2 OUTPUT: Tue Jul 24 09:46:13 2007
Securing a Child Restraint in a Rear
Seat Position
OIE-ID = 943673 Owner = tackle01 LMD = 11-apr-2007 LMB = tackle01
When securing a child restraint in a rear seating
position, study the instructions that came with your child
restraint to make sure it is compatible with this vehicle.
If your child restraint has the LATCH system, see Lower
Anchors and Tethers for Children (LATCH) on page 46
for how to install your child restraint using LATCH.
If you secure a child restraint using a safety belt and it
uses a top tether, see Lower Anchors and Tethers
for Children (LATCH) on page 46 for top tether anchor
locations.
Do not secure a child restraint in a position without a
top tether anchor if a national or local law requires that
the top tether be anchored, or if the instructions that
come with the child restraint say that the top strap must
be anchored.
In Canada, the law requires that forward-facing child
restraints have a top tether, and that the tether be
attached.
If your child restraint does not have the LATCH system,
you will be using the safety belt to secure the child
restraint in this position. Be sure to follow the
2008 - Saturn VUE Owner Manual (July 23, 2007)
instructions that came with the child restraint. Secure
the child in the child restraint when and as the
instructions say.
If you need to install more than one child restraint in the
rear seat, be sure to read Where to Put the Restraint
on page 45.
1. Put the child restraint on the seat.
2. Pick up the latch plate, and run the lap and shoulder
portions of the vehicle's safety belt through or
around the restraint. The child restraint instructions
will show you how.
1379321
53