Saturn VUE 2008 Owner's Manual page 51

Hide thumbs Also See for VUE 2008:
Table of Contents

Advertisement

JOBNAME: 1st Edition PAGE: 46 SESS: 1 OUTPUT: Tue Jul 24 09:46:13 2007
CAUTION:
{
Children can be seriously injured or strangled
if a shoulder belt is wrapped around their neck
and the safety belt continues to tighten.
Secure any unused safety belts behind the
child restraint so children cannot reach them.
Pull the shoulder belt all the way out of the
retractor to set the lock, if your vehicle has
one, after the child restraint has been installed.
Be sure to follow the instructions of the child
restraint manufacturer.
Notice:
SIO-ID=1689380 LMD=23-jan-2007
between the child restraint LATCH attachment parts
and the vehicle's safety belt assembly may cause
damage to these parts. Make sure when securing
unused safety belts behind the child restraint
that there is no contact between the child restraint
LATCH attachment parts and the vehicle's safety
belt assembly.
2008 - Saturn VUE Owner Manual (July 23, 2007)
SIO-ID=1689377 LMD=10-aug-2005
Contact
Folding an empty rear seat with the safety belts
secured may cause damage to the safety belt or the
seat. When removing the child restraint, always
remember to return the safety belts to their normal,
stowed position before folding the rear seat.
1. Attach and tighten the lower attachments to the
lower anchors. If the child restraint does not have
lower attachments or the desired seating position
does not have lower anchors, secure the child
restraint with the top tether and the safety belts.
Refer to your child restraint manufacturer
instructions and the instructions in this manual.
1.1. Find the lower anchors for the desired
seating position.
1.2. Put the child restraint on the seat.
1.3. Attach and tighten the lower attachments on
the child restraint to the lower anchors.
2. If the child restraint manufacturer recommends that
the top tether be attached, attach and tighten the
top tether to the top tether anchor, if equipped.
Refer to the child restraint instructions and
the following steps:
2.1. Find the top tether anchor.
2.2. Route, attach, and tighten the top tether
according to your child restraint instructions
and the following instructions:
51

Advertisement

Table of Contents
loading

Table of Contents