Saturn VUE 2008 Owner's Manual page 289

JOBNAME: 1st Edition PAGE: 45 SESS: 1 OUTPUT: Tue Jul 24 09:46:13 2007
2. Locate the aim dot on the lens of the low-beam
headlamp.
3. Measure the distance from the ground to the aim
dot on the low-beam headlamp. Record the
distance.
2008 - Saturn VUE Owner Manual (July 23, 2007)
4. At the wall measure from the ground upward (A) to
1756669 the recorded distance from Step 3 and mark it.
5. Draw or tape a horizontal line (B) on the wall the
width of the vehicle at the height of the mark in
Step 4.
Notice:
SIO-ID=817567 LMD=13-sep-2002
headlamp to improve beam cut-off when aiming.
Covering a headlamp may cause excessive
heat build-up which may cause damage to the
headlamp.
6. Turn on the low-beam headlamps and place a
piece of cardboard or equivalent in front of the
headlamp not being adjusted. This allows only the
beam of light from the headlamp being adjusted
to be seen on the flat surface.
1656201
Do not cover a
289