Saturn VUE 2008 Owner's Manual page 290

JOBNAME: 1st Edition PAGE: 46 SESS: 1 OUTPUT: Tue Jul 24 09:46:13 2007
7. Locate the vertical headlamp aiming screws, which
are under the hood near each headlamp assembly.
The adjustment screw can be turned with a 6 mm
socket.
8. Turn the vertical aiming screw until the headlamp
beam is aimed to the horizontal tape line. Turn it
clockwise or counterclockwise to raise or lower the
angle of the beam.
290
9. Make sure that the light from the headlamp is
1756664 positioned at the bottom edge of the horizontal tape
line. The lamp on the left (A) shows the correct
headlamp aim. The lamp on the right (B) shows the
incorrect headlamp aim.
10. Repeat Steps 7 through 9 for the opposite
headlamp.
2008 - Saturn VUE Owner Manual (July 23, 2007)
1656218