Powering Up The Nvr & Cameras - Q-See Presidio Series Quick Start Manual

Step 5: Connect to the Router
5A. Plug the included Network (Ethernet) cable into the
Network (LAN) port on the back of the NVR.
5B. Connect the other end of the cable to an open port
on your router (not included). You will hear a click
when the cable is properly connected.
Step 6: Powering Up the NVR & Cameras
6A. Plug the NVR power supply cable into the power
port on the back of the NVR. Your power port and
power cable may look different than pictured here.
6B. Plug the NVR power supply cable or power adapter
into a surge protector (not included).
8