Connect Your Nvr - Q-See Presidio Series Quick Start Manual

2C. Plug the other end of the camera cable into an
available PoE port on the back of your NVR. Again,
you will hear a clicking noise when cables are
inserted correctly. Repeat steps 2A through 2C for
each camera.
Step 3: Connect NVR to Display
There are two options to connect the NVR to a display.
Option A: HDMI
1. Plug the included HDMI cable into the NVR's HDMI
port.
2. Connect the other end of the HDMI cable to the
monitor or TV.
3. Plug the monitor or TV into a surge protector.
6