Sanyo RCS-BH80UA.WL Instruction Manual page 31

Split system air conditioner
Hide thumbs Also See for RCS-BH80UA.WL:
Table of Contents

Advertisement

NOTE
To warm up the system, the power mains must be turned on at least five (5) hours before operation.
STEP 1
To start the air conditioner
Press the operation button (ON/OFF button).
STEP 2
Setting the mode
Press the MODE button to select the mode of your choice.
[
NOTE
STEP 3
Setting the fan speed
Press the FAN SPEED selector button to select the fan speed of your choice.
[
If AUTO is selected, the fan speed switches automatically.
STEP 4
Setting the temperature
Use the
(
STEP 5
Setting the airflow direction
When more than one indoor unit is connected, the UNIT button is used first to select a
unit. Then use the FLAP button to set the airflow direction to a specific angle or to
sweep. (Refer to the description of the remote control unit.)
STEP 6
To stop the air conditioner
Press the operation button (ON/OFF button) again.
Operation
STEP 2
STEP 3
(AUTO),
(HEAT),
(AUTO) and
(HEAT) are used only for heat pump type.
(AUTO),
(HI.),
(MED.) or
or
button as appropriate to change the temperature setting as desired.
reduces the temperature, and
STEP 1, 6
STEP 4
STEP 5
(DRY),
(COOL) or
(LO.)]
increases the temperature.)
(FAN)]
2 - 13
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents