Sanyo RCS-BH80UA.WL Instruction Manual page 15

How to set the OFF timer (
How to set the OFF cycle timer (
How to set the ON timer (
1
How to stop the timer operation
To adjust the timer
1 - 14
)
Operation
1. Press the ON/OFF button to start
the air conditioner.
2. Press the TIMER SET button once to
select the mode.
3. Press the button until 3.5 is
displayed.
Press the button if the set
time is exceeded.
4. Press the SET button to set the
OFF timer.
(Example) To stop the air conditioner after 3.5 hours every time
Operation
1. Press the ON/OFF button to start
the air conditioner.
2. Press the TIMER SET button twice to
select the mode.
3. Set the time using the
4. Press the SET button to set the
OFF cycle timer (
When the OFF cycle timer is set, the unit will stop after 3.5 hours every
NOTE
NOTE
operation.
)
Operation
1. Press the ON/OFF button to start
the air conditioner.
2. Press the TIMER SET button three times
to select the mode.
3. Press the button until 10.5 is
displayed.
Press the button if the set
time is exceeded.
4. Press the SET button to set the
ON timer.
NOTE
NOTE
When the ON timer is set, the unit enters the paused state.
Operation
Push the CL button.
• Each press of the
button increases the timer operation period with half an hour
(30 minutes) step, up to 72.0 hours.
• Each press of the
button decreases the timer operation period with half an hour
(30 minutes) step, down to half an hour.
(Example) To stop the air conditioner after 3.5 hours
$
$
)
$
or button.
$
) .
(Example) To start the air conditioner after 10.5 hours
$
$
$
Indication
The and time
indications (hour) flash.
The indication
disappears and time
indications (hour) flash.
Indication
The and time
indications (hour) flash.
The indication
disappears and time
indications (hour) flash.
Indication
The and time
indications (hour) flash.
The and indications
shown in the display disappear
and time indications (hour)
flash.
Indication
The indication
disappears.