Sanyo RCS-BH80UA.WL Instruction Manual page 27

A: ON/OFF operation
button
B: MODE button
D: FAN SPEED selector
button
G: TIMER SET button
H: Time setting buttons
I: SET button
J: CL button
E: FILTER reset button
P: ACL button
A: ON/OFF operation button
B: MODE button
C: Temperature
setting buttons
D: FAN SPEED selector
button
E: FILTER reset button
Remote Cotrol Unit
This button is for turning the air conditioner on and off.
Use this button to select one of the following five operations:
(AUTO)
: Used to automatically set cooling or heating operation.
Only for heat pump type
(HEAT)
: Used for normal heating operation.
Only for heat pump type
(DRY)
: Used for dehumidifying without changing the room temperature.
(COOL)
: Used for normal cooling operation.
(FAN)
: Used to run the fan only, without heating or cooling operation.
: Press this button to increase the temperature setting.
: Press this button to decrease the temperature setting.
(AUTO)
: The air conditioner automatically decides the fan speed.
(HI.)
: High fan speed.
(MED.)
: Medium fan speed.
(LO.)
: Low fan speed.
Use this button to reset the filter sign
timer for the filter and informs you when the filter needs cleaning.
NOTE
When low fan speed is selected and the air conditioner is in cooling
NOTE
operation at a low outdoor temperature of less than 50°F, the air
conditioner may automatically switch to medium fan speed.
M: TRANSMITTER
K: SENSOR
Q: DISPLAY
C: Temperature setting
buttons
F: FLAP button
N: ADDRESS button
L: VENTILATION
button
O: SENSOR button
(temperature range: 62 ~ 80 °F)
(temperature range: 60 ~ 78 °F)
(temperature range: 64 ~ 86 °F)
(temperature range: 64 ~ 86 °F)
. The air conditioner has a
2
2 - 9