Monitoring Operations: Display Of Indoor Unit And Outdoor Unit Sensor Temperatures - Sanyo C4272R Service Manual

5-4. Monitoring Operations: Display of Indoor Unit and Outdoor Unit Sensor Temperatures

<Operating procedure>
(1) Press and hold the
longer to switch to temperature monitor mode.
During temperature monitoring, "Service Monitor" is lit.
(The display and operations are the same as when monitor mode is started from
the unit remote controller.)
(2) Press the button and select the indoor unit to monitor.
(3) Use the temperature setting
temperature to monitor.
The selected indoor unit No. and the temperature data are displayed.
(4) To end monitoring, press the
* The display does not blink.
Indoor unit data
1
Outdoor unit data
2
3
4
* Depending on the model, some items may not be displayed.
5
6
button and button simultaneously for 4 seconds or
and buttons to select the item code of the
button. The display returns to the normal display.
I e t m c o d e
02 Indoor unit intake temp.
03 Indoor unit heat exchanger temp. (E1)
04 Indoor unit heat exchanger temp. (E2)
05 –
06 Indoor unit discharge temp.
07 –
08 –
09
0A Discharge temp. (TD)
0b –
0C –
0d Intake temp. (TS)
0E Outdoor unit heat exchanger temp. (C1)
0F Outdoor unit heat exchanger temp. (C2)
10 –
11 Outdoor air temp. (TO)
12 –
13 –
14 Current value
15 Outdoor MV value
19 Frequency
5. Outdoor unit maintenance remote control
M e a n n i g f o C o d e
V-6
(4)
(1) (2)
SM831148
(3)