Verify the minimum measurements required for correct installation of the appliance. The coffee maker must be
installed in a column and the column must be firmly fixed to the wall with commercially available brackets.
IMPORTANT!
All installation or maintenance operations must be performed with the appliance disconnected
●
from the mains electricity supply.
Kitchen furniture in direct contact with the appliance must be heat resistant 65°C min.
●
To guarantee correct ventilation, leave a gap at the bottom of the cabinet
●
(see measurements below).
M
k
n
SIDE
CABINETRY DIMENSIONS
I
Minimum inside width of cavity
J
Overall width of cabinetry
K
Minimum inside height of cavity
L
Overall height of cabinetry
M
Minimum inside depth of cavity
n
Ventilation Air Gap
6A
CABINETRY DIMENSIONS (460mm HIGH CAVITY)
L
J
I
Electrical supply
TOP
EB60 MODELS
mm
560
600
450
460
545
50
PROUD INSTALL
16–20mm
20mm
FLUSH INSTALL
16–20mm
20mm
2mm
COFFEE MAKER INSTALLATION GUIDE
| 5