Fisher & Paykel BI601/451 Installation Information

INSTALLATION INFORMATION FOR QUANTUM BI601/451 SERIES BUILT-IN OVENS

IMPORTANT INFORMATION

Read the instructions before installing or using this
product.
Please make this information available to the person
responsible for installing this oven as soon as possible,
it could reduce your installation cost.

CAUTION

In order to avoid a hazard these products must be installed
according to these instructions for installation.
Please follow installation information carefully. If in doubt
consult your local building authority by-laws.
Failure to install the appliance correctly could invalidate any
warranty or liability claims and lead to prosecution.
The product is to be installed only by an authorised
person.

WARNINGS

The cavity must be a completely sealed box with no gaps.
This will ensure the cooling air flows under the product
to give the correct venting and cooling for the oven and
cabinet surround.
Take care of sharp edges when handling products.

BEFORE YOU START

DO Ensure a suitable disconnection switch is
incorporated in the permanent wiring, positioned to comply
with the Local Wiring Rules and Regulations.
DO Ensure that the location of the oven connection
socket is outside the installation space if the appliance is
flush to the rear wall.
DO Ensure the benchtop and the oven cavity are square
and level.
DO Ensure the electrician allows at least 1.5m free
length of connection cable within the cavity for ease of
installation and service of the oven.
DO Ensure that the interconnection cord between the
cooktop and the oven or control box is not accessible
via cupboard doors after installation. This applies to any
extension cord as well, even though they are double
insulated.
DO Use easy to clean finishes for the wall surfaces
surrounding the oven and cooktop to aid removal of any
cooking fume staining resulting from the use of the oven
and cooktop.
DO Check the height from the floor suits the user.
DO
Ensure that drawers and doors will be clear of
obstruction when fully opened.
Part No. 541001 QBI601/451 NZ ERC E September 2001