Recalling Video/Audio Settings (Scenes) - Roland XS-42H Reference Manual

Recalling Video/Audio Settings (Scenes)

Video/audio settings can be registered as "scenes" and recalled for use when necessary. This unit provides ten scenes.
Registering to a scene
Video/audio settings are automatically registered in the currently
selected scene. You don't need to perform any operation to
register them.
The following settings are registered in a scene.
5 Output menu
*
Except for "Color Space" and "Signal Type"
5 Input menu
5 Composition menu (VP-42H)
5 Audio menu
5 Cross-point (XS-42H)
Recalling a scene
1
Make sure that the [INPUT]/[MENU] button is unlit.
2
Use the [TIME] knob to specify the scene switching time.
3
Press the SCENE SELECT button of the scene number that
you want to recall.
The settings are recalled. The currently selected button is lit
yellow.
1
Press the [SCENE] button to make it light green.
SCENE 1–5
SCENE 6–10
Now you can use the cross-point buttons and the [BLACK] button
to select a scene. The currently selected button is lit yellow.
2
Press the cross-point button or [BLACK] button of the
scene number that you want to recall.
The settings are recalled.
5 The scene switching time is common with the video switching
time. The setting of the [TIME] knob is used.
Copying or exchanging scenes
The settings registered in a scene can be copied to another scene or
exchanged between scenes.
1
Long-press the [MENU] button 0 "System" 0 select
"Scene Copy" and press the [ENTER] button.
2
Select "Source" (copy/exchange source scene) and
"Destination" (copy/exchange destination scene),
and use the VALUE [–] [+] buttons to specify the scene
numbers.
3
Choose "Execute Copy" or "Execute Swap," and press the
[ENTER] button.
The scene is copied or exchanged.
4
Press the [MENU] button several times to close the menu.
MEMO
5 You can change the scene transition effect. Long-press the
[MENU] button 0 "System" 0 "Scene Transition, " and specify
"Black, " "Fade, " or "Motion" (VP-42H).
5
You can automatically switch scenes 1–10. Long-press the [MENU]
button 0 "System" 0 "Auto Scene Switch" and set the scene
display interval to "30sec, " "1min, " or "3min. "
Lit green
Video Operations
9