Roland XS-42H Reference Manual page 3

Cross-point [1]–[4] buttons
These buttons switch the cross-point of the video
channel.
Button Status
Lit green Valid video is being input.
Lit red This is the selected video channel.
Dark No video is input.
SCENE SELECT [1]–[10] buttons
Recall a scene (registered video/audio settings).
5 The video/audio settings are automatically registered to
the currently selected scene.
Cooling vents
(top panel, side panels)
These exhaust internal heat to
prevent the interior of the unit
from overheating.
NOTE
Do not block the cooling vents. If the cooling vents
are blocked, the temperature inside the unit will rise,
possibly causing malfunctions due to overheating.
p. 8 [BLACK] button
Fades-out the output video to a black screen.
If you press the cross-point button of a faded-out output, it fades-in.
Button Status
Lit red Faded out
Lit green Normal output
5 You can also fade-out the output video to a still image.
[SCENE]/[MENU] button
Scene function: Press the button
Turns on the scene function. Recalls a scene (registered video/audio
settings) (p. 9).
5 The cross-point buttons and the [BLACK] button function as scene
select buttons 1–10.
5 The video/audio settings are automatically registered to the currently
selected scene.
Menu display: Long-press the button
The menu is displayed on the monitor connected to the OUTPUT
HDMI 2 connector (p. 6).
While the menu is displayed, each press of the button takes you
back to the next higher level of the menu. If the highest menu level
is already shown, the button closes the menu.
[INPUT]/[MENU] button
p. 9
Video assignment function: Press the button
You can use video assignment shortcuts (p. 8). You can use the
SCENE SELECT buttons to select the video assigned to each layer.
SCENE SELECT buttons Explanation
[1]–[4] buttons
[6]–[10] buttons
Menu display: Long-press the button
The menu is displayed on the monitor connected to the OUTPUT
HDMI 2 connector (p. 6).
While the menu is displayed, each press of the button takes you
back to the next higher level of the menu. If the highest menu level
is already shown, the button closes the menu.
Panel Descriptions
(lit green)
(lit red)
(lit green)
Select layers 1–4 (when selected: lit yellow)
Select video (when selected: lit red)
[6]–[9]: INPUT HDMI 1–4
[10]: Still image
(lit red)
p. 8
p. 6, 9
p. 6, 8
3