Rear Panel - Roland XS-42H Reference Manual

Panel Descriptions

Rear Panel

* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections.
DC IN jack
Connect the included AC adaptor to this jack.
Place the AC adaptor so the side with the indicator faces
upwards and the side with textual information faces
downwards. The indicator will light when you plug the
AC adaptor into an AC outlet.
Power cord
to an AC outlet
USB port
You can connect a USB flash drive here. This
is used to update the system program.
[POWER] switch
This switch turns the power on/off.
Ground terminal
Connect this to an external earth or ground
if necessary.
OUTPUT HDMI 1, 2 connectors
These output video and audio. Connect them to a projector,
video recorder, or external display.
5 The menu is shown on the monitor connected to the OUTPUT
HDMI 2 connector.
5
The same video is output from the OUTPUT HDMI 1 and 2
connectors.
4
AC adaptor
p. 6
LAN port
This is used to remotely control this unit from a web browser or
terminal software.
LINE OUT jacks
These output the result of mixing the input audio.
Connect these to your audio recorder, amp, or
speakers etc.
5
The output audio is the same as the audio of the
OUTPUT HDMI 2 connector.
LINE IN jacks
These input audio. Connect these to your audio or
video device such as an audio mixer or CD player.
RS-232 connector
You can connect this to a computer equipped
with an RS-232 connector, and remotely
control this unit.
USB MEMORY port
You can connect a USB flash drive here This
is used to load still images or to update the
system program.
INPUT HDMI 1–4 connectors
These input video and audio. Connect them to a video device
such as a video camera or BD player, or to a computer.
5 The input format is automatically recognized.
5 In the Input menu, the "Input Status" shows the video format
that is being input to each channel, and the presence or
absence of an HDCP signal.
p. 14, 17, 25
p. 25
p. 10