Other Functions; Manually Saving The Current Settings; Formatting A Usb Flash Drive - Roland XS-42H Reference Manual

Other Functions

Manually Saving the Current Settings

If automatic saving of settings is disabled, all the settings you make
are lost when you turn off the power. You can manually save the
current settings as necessary. Saved settings can be recalled and
used.
MEMO
5 To enable/disable automatic saving of settings, long-press the
[MENU] button 0 "System" 0 specify "Auto Setting Store. "
5 The unit can store only one set of settings. When you save
settings, the previously saved settings are overwritten.
5 If automatic saving is disabled, the unit starts up with the last-
saved settings the next time you turn on the power.
Saving
1
Long-press the [MENU] button 0 "File" 0 in Internal
Memory, select "Store" and press the [ENTER] button.
The current settings are saved. When the operation is finished, the
message "Completed. " appears.
2
Press the [ENTER] button to close the message.
3
Press the [MENU] button several times to close the menu.
Recalling
Here's how to recall the settings that are saved in the unit. When you
recall the settings, the current settings are overwritten.
1
Long-press the [MENU] button 0 "File" 0 in Internal
Memory, select "Recall" and press the [ENTER] button.
The settings are recalled. When the operation is finished, the
message "Completed. " appears.
2
Press the [ENTER] button to close the message.
3
Press the [MENU] button several times to close the menu.
12

Formatting a USB Flash Drive

The first time that you use a USB ash drive, you must use the unit to
format it.
NOTE
5 A USB flash drive that was not formatted by this unit will not be
recognized.
5 Never turn off the power or remove the USB flash drive while the
message "Processing. " is shown.
5 When you format a USB flash drive, all data on that USB flash drive
is erased. If the drive contains important data, back it up to your
computer before you format the drive.
1
Connect the USB flash drive to the USB MEMORY port.
Even if the USB flash drive is connected to the USB port, it
is not recognized.
* Ensure that the USB flash drive is oriented
correctly, and insert it all the way into the port.
Do not use excessive force.
2
Long-press the [MENU] button 0 "File" 0 in USB
Memory, select "Format" and press the [ENTER] button.
3
Use the CURSOR [ ? ] [ = ] buttons to select "Execute," and
press the [ENTER] button.
Formatting is executed. When the operation is finished, the
message "Completed. " appears.
4
Press the [ENTER] button to close the message.
5
Press the [MENU] button several times to close the menu.
A recognition message appears.