Table of Contents
Advertisement
Quick Links
Rack-Mounting
Attaching the rack-mount angles
By attaching the included rack-mount angles to this
unit, you can mount it in a rack.
1.
Remove the screws from the side panels. Using
the screws that you removed, attach the rack-
mount angles as shown in the illustration.
Important notes on rack mounting
5 Install in a well-ventilated location.
5 Do not block the cooling vents located on
the unit's top panel and side panels.
5 Avoid mounting the unit in a sealed-type
rack. Warm air within the rack cannot
escape and is sucked into the unit, making
efficient cooling impossible.
5 If the back of the rack cannot be opened, install
an exhaust port or ventilation fan at the top back
surface of the rack, where warm air collects.
5 When using the unit while mounted in a movable
case (portable rack), remove the front and rear rack
covers so that the front and back of the unit are not
obstructed.
5 Take care not to pinch your fingers etc. while
mounting the unit in a rack.
Before using the unit, ensure that its system program is at the most recent version. For information on available upgrades for the
system program, see the Roland website (https://proav.roland.com/).
You can check the system program version by Long-pressing the [MENU] button0"System"0"Version. "
Before using this unit, carefully read "USING THE UNIT SAFELY" and "IMPORTANT NOTES" (the leaflet "USING THE UNIT SAFELY" and the
Owner's Manual (p. 8)). After reading, keep the document(s) where it will be available for immediate reference.
Free-Standing Use
Attaching the rubber feet
If you will be placing this unit on a desk or shelf for
use, attach the included rubber feet (4 pcs.). This
prevents the unit from slipping or from scratching the
surface on which it is placed.
1.
Remove the rubber feet from the sheet.
2.
Peel the double-sided tape off the rubber feet,
and affix the feet so that they cover the four
guide holes on the bottom of the unit.
PDF Manual
(download from the Web)
Details on operations, menu lists, and a list of RS-232
commands are provided in "Reference Manual" (PDF).
Downloading
1.
Access the Roland website.
https://proav.roland.com/
2.
Move to the product page 0 click "Support" 0
download the applicable PDF file.
Owner's Manual
© 2018 Roland Corporation
Advertisement
Table of Contents
Related Manuals for Roland VP-42H
Summary of Contents for Roland VP-42H
- Page 1 Before using the unit, ensure that its system program is at the most recent version. For information on available upgrades for the system program, see the Roland website (https://proav.roland.com/). You can check the system program version by Long-pressing the [MENU] button0“System”0“Version. ”...
-
Page 2: Panel Descriptions
Connect stereo mini-jack headphones Long-press this to turn on/off the panel lock function. here. XS-42H VP-42H [PHONES] knob While a menu is displayed Adjusts the volume of the headphones. While a menu is displayed, these function as the following buttons. - Page 3 The menu is displayed on the monitor connected to the OUTPUT HDMI 2 connector (p. 5). VP-42H While the menu is displayed, each press of the button takes you back to the next higher level of the menu. If the highest menu level is already shown, the button closes the menu.
-
Page 4: Rear Panel
Panel Descriptions Rear Panel * To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections. DC IN jack LAN port Connect the included AC adaptor to this jack. This is used to remotely control this unit from a web browser or terminal software. -
Page 5: Basic Operation
Basic Operation Turning the Power On/Off Operating the Menu Here’s how to access the menu, and make video/ * Before turning the unit on/off, always be sure to turn audio settings and settings for this unit. the volume down. Even with the volume turned down, you might hear some sound when switching 5 The menu is shown only on the monitor that’s the unit on/off. -
Page 6: Compositing Video
Basic Operation Compositing Video VP-42H only Up to four screens of the video inputs can be composited as layers and output. Press the [INPUT] button to make it light green. Hiding the layers Long-press the [MENU] button 0 “Composition” 0 “Layer 1”–“Layer 4” 0 set Lit green “Layer”... -
Page 7: Switching The Video
The following settings are registered in a scene. 5 Output menu * Except for “Color Space” and “Signal Type” 5 Input menu 5 Composition menu (VP-42H) 5 Audio menu 5 Cross-point (XS-42H) Press a cross-point button. The horizontal direction of the cross-point buttons is the input channel, and the vertical direction is the output channel. -
Page 8: Using The Unit Safely
• Roland assumes no liability concerning the restoration of any stored content that has been lost. • This unit allows you to switch images at high speed. For 20 cm (8 in.) or greater...