Table of Contents
Advertisement
■[F82] Input of line name
Function to display the specified character string on the sub display.
To display in the measurement mode, select 2 value display [dUAL] or character string display [LinE] using
the setting on [F10] Sub display setting.
<Operation>
Press the
or
Input of line name
Press the
or
sub display (right).
Press the
button to make the next digit to the right flash. Input the
line name.
(The most significant digit flashes when the
The order of displayed characters is A b • • • Y (Z) 0 1 • • • 9 symbol
space.
(Characters which can be displayed are different for 1 digit on the left and 3 digits on the right.)
Pressing the
The set line name flashes by pressing the
(At this point, the setting of the line name is not complete.)
Press the
•Characters which can be displayed for each digit are as follows.
(Pattern for 3 digits on the right)
Characters Q, X, Z, /, or cannot be displayed.
(Pattern for 1 digit on the left)
Characters A to Z can be displayed (the same as the 3 digits on the right).
button in function selection mode to display [F82].
Press the
button.
button to input the line name displayed on the
and
button simultaneously adds/deletes the dot (decimal point).
button to set.
[F82] Input of line name completed
Move on to input of line name.
button is pressed at the least significant digit.)
button for 1 second or longer.
Return to function selection mode.
-52-
No.PS※※-OMU0006-A
Hide quick links:
Advertisement
Table of Contents
