Table of Contents
Advertisement
■[F82] Input of line names
The name of a line can be input. (Up to 6 English characters and/or numbers)
The sub screen setting needs to be changed to show line names.
(Refer to [F10] Selection of display of sub screen on page 38.)
<Operation>
Press the
or
The sub screen alternately displays [LiNE] and the line name.
Press the
Sub
screen
Press the
button (less than 1 second).
Press the
button for 1 second or longer.
Press the
<A dot "." can be displayed at the bottom left of each digit>
During setting, when the appropriate digit is flashing, press the
second or longer, a dot will be displayed.
To remove the dot, perform the same button operation.
button in function selection mode to display [F82] on the main screen.
button.
The left most digit starts flashing. Select the required character from
A→b→C• • •X→y→Z→0→1• • •8→9→_→ ― →￣→/→*→space→A
by pressing the
After all 6 digits are input
button to confirm.
[F82] Setting of security code complete
and
buttons.
The next digit to the right will flash and can be edited.
(Follow the same procedure for the remaining digits)
Flashing stops.
Return to the function selection mode.
and
-48-
buttons simultaneously for 1
No.PF##-OMM0005
Advertisement
Table of Contents
