Table of Contents
Advertisement
■[F82] Line name
A line name can be input (up to 6 characters and/or numbers).
The sub display setting can be changed to show a line name. (Refer to [F10] Sub display on page 43.)
<Operation>
Press the
or
[LiNE] and [the current set value] are displayed in turn on the sub display.
Line name
[LinE] is displayed on the main display.
[The current set value] flashes on the sub display.
Press the
or
(Space)
A
Press the
button to move on to input the next digit.
<When a dot [.] is displayed at the bottom left of each digit>
Press the
and
: A dot cannot be displayed for the 6th digit.
Perform the above button operation to remove a dot.
Press the
button for 1 second or longer to stop the flashing.
button in function selection mode to display [F82] on the main display.
button to change.
b
C
X
y
Z
0
buttons simultaneously for 1 second or longer.
[F82] Setting of line name completed.
Return to function selection mode.
Press the
button.
1
2
7
8
9
Press the
button to set.
-53-
/
No.PF※※-OMS0002-B
Advertisement
Table of Contents
