Chamberlain MYQ-G0301 Manual page 12

Wireless Setup and Installation
Step 8: Add New Device continued
See Appendix on page 21 for location of garage door opener
program or learn buttons.
7. On your garage door opener - press and release the program
or learn button.
NOTE: Release the button quickly for best results.
Result: Door should move.
If the door moves, go to next step. If the door doesn't move, the MyQ App will prompt you to try again. If you're still
unsuccessful, see Troubleshooting
9. When the garage door opener is paired, in the
MyQ App enter a name for the door and tap Next.
LED
Program Button
on page 17.
8. In MyQ App,
tap I have pressed the Program Button.
10. Success! Tap Finish to continue to the next page for
instructions on mounting your hub.
- 12 -