Saving In The Directory; Preferred Calls; Blocked Calls - BellSouth MH9932 Installation Instructions & Owner's Manual

Caller ID System Operation

Saving in the Directory

1. Press the DIR. button at STANDBY mode.
2. Press the EDIT button.
3. Use the TELEPHONE KEYPAD button (0~9) to enter the name,
(see page 36 for details) you can store up to 15 characters.
4. Press the
5. Enter the telephone number using the TELEPHONE KEYPAD button
(0~9). You can store up to 16 digits.
6. Press the SAVE button.
7. Press the DIR. button to go back to STANDBY mode.
(If no activate buttons are pressed for 20 seconds, the LCD Screen
will automatically return to STANDBY mode.)
NOTE : It will not save a duplicate telephone number or a name without the
corresponding telephone number in the Directory.

Preferred Calls

You can assign Preferred Call which will generate a special ringer sound at
the start of the second ring to any welcome caller in the DIRECTORY.
When you are saving the name and number into the DIRECTORY, add "#"
mark at the beginning of the name by pressing the

Blocked Calls

You can assign a Blocked Call which will disable the ringer sound from the
second ring, to any caller in the DIRECTORY.
When you are saving the name and number into the DIRECTORY, add " "
mark at the beginning of the name by pressing the
button once.
28
# button.
button.
*
*