Getting Started - BellSouth MH9932 Installation Instructions & Owner's Manual

Getting Started

Connecting Your Phone
This section is a reference guide
proper operation.
1. Carefully remove your cordless telephone from its shipping carton. If
there is any visible damage, do not attempt to operate this equipment.
Return it to the place of purchase.
2. Check to be sure you have all items that come with this cordless telephone
system. You should have a HANDSET, BASE UNIT, AC ADAPTOR,
TELEPHONE LINE CORD, SHORT TELEPHONE LINE CORD, WALL
MOUNT BRACKET and OWNER'S MANUAL.
HANDSET
TELEPHONE
LINE CORD
3. Install batteries which will be used as backup power for time stamp feature to
function in case of power failure.
A. Unscrew and open the Battery Cover located
on the bottom of the BASE UNIT.
B. Place 4 AAA size Batteries (1.5 volt) into the
compartment, paying attention to the polarity
shown in the compartment.
C. Close the Battery Cover and screw back.
4. Insert one plug of the telephone line cord into the house telephone jack and
the other end into the telephone line jack on the back of the BASE UNIT.
(If you have an older 4-prong telephone jack, you will need an RJ-11C
TELEPHONE JACK ADAPTOR. This adaptor is available at the same place
you purchased your telephone.)
in connecting your cordless telephone for
BASE UNIT
SHORT TELEPHONE
LINE CORD
15
WALL MOUNT
BRACKET
AC ADAPTOR