Placing Calls; Handset Redial Feature - BellSouth MH9932 Installation Instructions & Owner's Manual

Cordless Telephone Operation

Placing Calls

1. Press the TALK
to count. The BASE UNIT IN USE indicator
will light up.
2. Listen for a dial tone.
3. Dial the phone number.
4. When finished with your call, press the TALK
button or place the HANDSET on the BASE UNIT.
The BASE UNIT IN USE indicator will turn off.
OR
1. Dial the phone number.
2. Press the 7 or 10 or 1+ button.
The BASE UNIT IN USE indicator will light
and the number will automatically dial.
3. When finished with your call, press the TALK
button or place the HANDSET on the BASE UNIT.
The BASE UNIT IN USE indicator will turn off.

HANDSET Redial Feature

1. If you get a busy tone, press the
TALK button to hang up.
2. Press the TALK button again.
3. Listen for a dial tone.
4. Press the RE/PA button. This will
automatically redial the last telephone
number you called.
5. When finished with your call, press the TALK
button or place the HANDSET on the BASE UNIT.
The BASE UNIT IN USE indicator will turn off.
OR
1. Press the RE/PA button.
2. Press the 7 or 10 or 1+ button.
The BASE UNIT IN USE indicator will light
and the number will automatically dial.
3. When finished with your call, press the TALK
button or place the HANDSET on the BASE UNIT.
The BASE UNIT IN USE indicator will turn off.
When you hear interference, press the SCAN
button to change the operating channel.
button, Call Timer starts
IMPORTANT
21