Changing Video Mode; Marker Search; Zoom; Last Scene Memory - LG V9720CMZ Owner's Manual

Changing Video Mode

With certain discs, the playback picture may be
•
flickering or Dot Crawl is shown on straight lines.
That means Vertical interpolation or De-interlace is
not perfectly matched with the disc. In this case,
the picture quality may be improved by changing
the video mode.
To change the video mode, press and hold
•
DISPLAY about 3 seconds during disc playback.
The new video mode number selected is displayed
on the TV screen. Check whether the video quality
has improved. If not, repeat the above procedure
until picture quality is improved.
Video mode sequence:
•
MODE1 → MODE2 → MODE3 → MODE1
If you turn off the power, the video mode will return
•
to initial default state (MODE1).
Detailed Description of each Video Mode
MODE1 : The source material of the DVD video (film mate-
rial or video material) is determined from disc
information.
MODE2 : Suitable for playing film based content or video
based material recorded by the progressive scan
method.
MODE3 : Suitable for playing video based content with
comparatively little motion.
N o t e :
The video mode setting only works when the Progressive
Scan option is set to "On" in the Setup menu.
DVD VCD

Marker Search

To enter a Marker
1 / 9
You can start playback from up to nine memorized
points. To enter a marker, press MARKER at the
desired point on the disc. The Marker icon appears
on the TV screen briefly. Repeat to enter up to nine
markers.
To Recall or Clear a Marked Scene
1. During disc playback, press SEARCH. The mark-
er search menu appears on the screen.
2. Within 10 seconds, press b / B to select a marker
number that you want to recall or clear.
3. Press ENTER and playback starts from the
marked scene. Or, Press CLEAR and the marker
number is erased from the list.
4. You can play any marker by inputting its number
on the marker search menu.
DVD
DivX
MARKER SEARCH
1 2 3 4 5 6 7 8 9
DVD VCD DivX

Zoom

Use zoom to enlarge the video image.
1. Press ZOOM during playback or still playback to
activate the Zoom function. The square frame
appears briefly in the right bottom of the picture.
2. Each press of the ZOOM button changes the TV
screen in the sequence: 100% size → 400% size
→ 1600% size → screen fit mode → 100% size
Screen fit mode:
You can change the way the image appears on
the screen when you're playing a DVD movie.
Press v/V to select between Normal, Enhanced,
and Maximum.
3. Use the b B v V buttons to move through the
zoomed picture.
4. To resume normal playback, press ZOOM repeat-
edly or CLEAR button.
Notes:
• Zoom may not work on some DVDs.
• Screen fit mode is available for playing the DVD disc,
VR disc and movie file.
DVD

Last Scene Memory

This player memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the player or switch
off the player. If you load a disc that has the scene
memorized, the scene is automatically recalled.
N o t e :
This player does not memorize the scene of a disc if you
switch off the player before commencing to play the disc.

Screen Saver

The screen saver appears when you leave the
DVD+VCR in Stop mode for about five minutes.
CD VCD
29