Table of Contents
Advertisement
DISPLAY
DVD
TV Aspect
4:3 : Select when a standard 4:3 TV is connected.
16:9 Wide: Select when a 16:9 wide TV is
connected.
Display Mode
DVD
Display Mode setting works only when the TV Aspect
mode is set to "4:3".
LetterBox: Displays a wide picture with bands on the
upper and lower portions of the screen.
Panscan: Automatically displays the wide picture on
the entire screen and cuts off the portions that do not
fit.
Progressive Scan
DVD
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for con-
nection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
To turn on progressive scan:
Connect component/progressive out of this unit to the
input of your monitor/television, set your television or
monitor to component/progressive Input.
1. Select "Progressive Scan" on the DISPLAY menu
then press B.
2. Select "On" using the v / V buttons.
3. Press ENTER to confirm your selection.
The confirm menu will appear.
4. When the confirm menu appears on your screen
"CANCEL" is highlighted as default. Use the b but-
ton to highlight "ENTER".
5. Pressing ENTER will set this unit to progressive
scan mode.
N o t e :
You must set the Video Output to "YUV" on the DIS-
PLAY menu.
Video Output
Set this unit's Vidoe Output options according to the
TV connection type.
S-VIDEO: When your TV is connected with the S-
VIDEO OUT jack on this unit.
YUV: When your TV is connected with the
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
jacks on this unit.
RGB: When your TV is connected with the RGB sig-
nal jack.
17
Advertisement
Table of Contents
