Rear Panel; Preparation - LG V9720CMZ Owner's Manual

Rear Panel

a b c d e
g
a
ANT.IN
Connect the VHF/UHF/CATV antenna to this terminal.
b
VCR IN LINE 1 (VIDEO/AUDIO (Left/Right))
Connect the audio/video output of an external source
(Audio system, TV/Monitor, VCR, Camcorder).
c
DVD/VCR OUT (VIDEO/AUDIO (Left/Right))
Connect to a TV with video and audio inputs.
d
COMPONENT/PROGRESSIVE SCAN VIDEO
OUT (Y Pb Pr) (DVD OUT)
Connect to a TV with Y Pb Pr inputs.
e
AUDIO OUT (Left/Right) (DVD OUT)
Connect to a TV or other equipment with audio inputs.

Preparation

Please refer to the documentation accompanying your other devices for further information.
Notes:
• Make sure the DVD+VCR is connected directly to the TV and tune the TV to the correct video input channel.
Do not connect the DVD+VCR's AUDIO OUT jack to the phono in jack (record deck) of your audio system. Do not con-
•
nect the DVD+VCR via another VCR. The DVD image could be distorted by the copy protection system.
The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. Position the units away from
•
each other or turn off the unit after removing the disc.
10
h i
f
g
h
i
j
j
AC Power Cord
Plug into the power source.
RF. OUT(DVD/VCR OUT)
Connect to a TV with RF coaxial inputs.
COAXIAL (DIGITAL AUDIO OUT jack)
(DVD OUT)
Connect to digital (coaxial) audio equipment.
S-VIDEO OUT (DVD OUT)
Connect to a S-Video Input on TV.
OPTICAL (DIGITAL AUDIO OUT jack)
(DVD OUT)
Connect to digital (optical) audio equipment.
f